Timberland PRO Men's Powertrain Alloy Toe SD+ Mid Work Boot - Black — TB1A11QF001
The Timberland PRO Powertrain SD+ Mid is an athletic alloy-toe work boot for static-sensitive floors — a static-dissipative rating, a conductive polyurethane midsole, Anti-Fatigue Technology, and a mid-cut collar for ankle support.
A premium synthetic upper, an alloy safety toe rated ASTM F2413 I/75 C/75 and CSA Z195 Grade 1, a static-dissipative (SD) rating with a conductive polyurethane midsole, a fiberglass shank, an antimicrobial mesh lining, mutilation-free hardware, Anti-Fatigue Technology built into an abrasion-resistant non-marking polyurethane outsole, and cement construction for flexibility.
Key Features of the Timberland PRO Powertrain SD+ Mid TB1A11QF001
- Premium synthetic upper
- Alloy safety toe — meets ASTM F2413 I/75 C/75 and CSA Z195 Grade 1
- Static-dissipative (SD) rated — meets ASTM F2413 and F2892 SD requirements
- Conductive polyurethane midsole for consistent static-dissipative performance
- Cement construction for flexibility and reduced break-in
- Mesh lining with antimicrobial treatment
- Fiberglass shank
- Anti-Fatigue Technology built into the outsole
- Timberland PRO 24/7 Comfort System
- Mutilation-free hardware
- Abrasion-resistant non-marking polyurethane outsole
Static-Dissipative, Alloy Toe
The SD rating means the boot bleeds static charge to ground through a conductive midsole and outsole so it cannot build up and discharge into sensitive electronics or flammable atmospheres, and the alloy toe delivers full ASTM impact and compression protection at a fraction of the weight of steel.
Athletic Build, Mid Collar
A synthetic upper and polyurethane outsole keep the boot light, Anti-Fatigue Technology built into the outsole returns energy across a shift on concrete, and the mid-cut collar adds ankle support the low Powertrain Sport does not.
Why Choose the Timberland PRO TB1A11QF001?
A lightweight, SD-rated, alloy-toe mid boot with non-marking slip resistance — the pick for electronics assembly, semiconductor, pharmaceutical, and warehouse floors that require static-dissipative footwear with ankle coverage.
Similar Styles to Consider
Shop more: Timberland PRO Boots, Alloy Toe Work Boots, Athletic Work Shoes
Frequently Asked Questions
What safety standards does the Powertrain TB1A11QF001 meet?
The alloy toe is rated ASTM F2413 I/75 C/75 and CSA Z195 Grade 1 for impact and compression, and the boot meets the ASTM F2413 and F2892 static-dissipative (SD) requirement.
What does static-dissipative (SD) mean?
An SD boot has a conductive sole that lets static charge drain safely to ground instead of building up on your body — required on many electronics, clean-room, and munitions floors. SD is not the same as EH: an EH boot insulates you from live circuits, while an SD boot deliberately conducts. Wear the rating your site specifies.
Is the Powertrain Mid waterproof?
It is a breathable synthetic boot built for indoor and dry-floor work; it is not waterproof.
How does the Powertrain Mid fit?
It fits like an athletic shoe and runs true to size — order the size you wear in running shoes, and choose Wide if you normally need an EE width. The alloy toe is roomier than steel; the footbed is removable.
What's the difference between the Powertrain boots and shoes?
Same alloy toe and Anti-Fatigue platform. The TB1A11QF001 is the SD+ mid boot; the TB1A1GT9065 and TB1A1B6U001 are SD+ low shoes in ripstop nylon; the TB0A1GHM001 adds an internal met guard with an EH rating instead of SD.
How do I clean the Powertrain Mid?
Brush off dirt, wipe the synthetic upper with mild soap and water, and air-dry away from heat. Keep the outsole clean — built-up grime can reduce static-dissipative performance.
